GB 234 Berg Oil Pump 30mm
SKU:
$126.00
126
129
$97.00 - $98.00
$97.00
Unavailable
per item
Berg pumps are standard 26 and 30mm VW pumps which we machine, blueprint, hard anodize and deck for maximum volume throughout the RPM range. They produce more than adequate oil pressure and volume, even for a 9,500-RPM engine. No larger pump is needed when all of the engine clearances are within factory wear limits. If you have a worn out or line bored engine, or too high of head temperature a giant oil pump will only put off fixing the problem or rebuilding for a short time. All Berg pumps are made for 8mm cases and are aluminum for proper expansion in correspondence with the case material. Our pumps come with an o’ring (GB 231-O) around the pump body to seal the pump to the case. They still require the stock gasket from the pump to the case. Originated by Bob Dixon and Gene Berg in 1972. Re-worked in USA by Gene Berg Enterprises.
Mandatory with all hydraulic cams and lifters to maintain proper constant pressure in the lifter. Special larger pumps for engines that require over 60 pounds of pressure such as all out race engines running 5,000 to 10,500 RPM. These require our GB 239-239B oil pressure relief cover to protect blowing out coolers, oil passage plugs, or filters.
Available as plugged for use with a full flow oil pump cover.
Mandatory with all hydraulic cams and lifters to maintain proper constant pressure in the lifter. Special larger pumps for engines that require over 60 pounds of pressure such as all out race engines running 5,000 to 10,500 RPM. These require our GB 239-239B oil pressure relief cover to protect blowing out coolers, oil passage plugs, or filters.
Available as plugged for use with a full flow oil pump cover.